Powder Coating For Industrial Applications

broken image

Powder coating is an advanced form of paint application in which a rough, powdery, dry compound is sprayed onto a substrate with the intention of forming a protective, uniform layer on that surface. Unlike traditional liquid paints which are delivered through an evaporating solvent through an extended evaporator, powder coating is usually applied directly to a flat surface via a consumable feeder. The powder is supplied in fine sheets or pellets and is spread by mechanical or chemical means depending on the application needs.

There are two major types of powder coating systems available in the marketplace: hot dip and cold dip. Hot dip systems use heat sensitive dyes, whereas cold dip systems use uv curable powders that can be mixed together with the paint in the required amount, heated up to approximately minus 300 degrees Celsius, and allowed to dry. This may well require a series of temperature checks and adjustments before the coating actually comes into contact with any surface. With either system, the uv coating must be protected from heat both before and after the powder coating has been applied. This is done through a process called vapor compression. See this product for more info!

Heat sensitive powder coatings at https://powderwerx.com/powder-coating/ are more commonly used for products such as electronics, where protection against electrical shock is paramount. Uv coating systems for electronics have recently experienced much success due to the developments in chip technology but also because of the growing popularity of solar panel applications. Heat sensitive coating systems are also very suitable for medical applications. UV liquid coatings for medical applications provide extremely high levels of UV resistance and ultra-violet radiation protection. The invention of the coated medical products, which are made of solid uv semiconductors, has provided medical professionals with unparalleled UV resistance capabilities.

Powder coatings have the additional benefit of excellent stickiness and long lasting durability. Abrasive finishes such as the use of sanding and grinding plates in conjunction with the application of a powder coating system can produce a heavy gloss finish that will resist chipping and peeling. Further, if the finish is allowed to dry between coats, it will provide an extremely tough and long lasting protection from the elements and the effects of weathering. Be sure to check out this website at https://www.youtube.com/watch?v=2NMmDb72DkA for more info about coating.

Other applications include use in the automotive, marine, and hobby craft industry as well as residential applications including showers, countertops, shower doors, shower walls, faucets, baseboards, ceilings, mirrors, countertop finishes, sink surrounds, decking, roofing, fountains, and patio furniture. Many products available in the powder coating realm have UV curable powder coatings. These are products that do not contain ozone depleting chemicals. In fact, many uv curable powder coatings have no chemical cleaners whatsoever.

There are two main types of powder coating systems. The first is referred to as solid pigments whereas the second is known as thermoplastics. Solid pigments consist of either a binder resin or thermoplastics. Thermoset resins are comprised of thermoplastic polyester resin and in some instances, may contain nylon or ethylene. Powder coating systems utilize either the above two forms of polymer. Although there are a few variations between these two systems, powder coating with thermoset powder and thermoplastic polyester resin yields the best results when used in industrial applications.